Refine Your Search

Date

Date

Topic

Topic

Fuel injection A-20B Exterior Lighting Committee Electrical, Electronics, and Avionics Standard Fuel tanks Exhaust emissions

Search Results

Viewing 21 to 40 of 42
<< First< Previous123Next >Last >>
Sort by relevance
Standard

Lighting, Aircraft Exterior, Night Vision Imaging System (NVIS) Compatible
2022-09-23
CURRENT
ARP4392
This SAE Aerospace Recommended Practice (ARP) describes the recommended performance levels for equipment located on the aircraft exterior which produces radiant energy which will provide desired information when viewed with NVIS goggles. These performance intensities, normally stated in candelas for visible light, are modified to consider the goggle spectral response range. Where necessary, location of the equipment on the airplane is specified. The spectral emission characteristics may or may not include visible light. Whether or not visible energy is emitted, this document will refer to these items of equipment as "lights".
Standard

Minimum Performance Standard for Aircraft Position Lights
2011-03-17
HISTORICAL
AS8037B
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This Aerospace Standard defines minimum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

Minimum Performance Standard for Aircraft Position Lights
2013-07-09
HISTORICAL
AS8037C
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This Aerospace Standard defines minimum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

Minimum Performance Standard for Aircraft Position Lights
2022-02-02
CURRENT
AS8037D
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This SAE Aerospace Standard (AS) defines minimum and maximum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

High Intensity Discharge Light Sources
2006-02-17
HISTORICAL
ARP5647
This SAE Aerospace Recommend Practice (ARP) is intended to recommend safety related best practices when using metal halides high intensity discharge (HID) lamps and power supplies in aircraft applications.
Standard

High Intensity Discharge Light Sources
2020-08-10
CURRENT
ARP5647B
This SAE Aerospace Recommend Practice (ARP) is intended to identify both safety related best practices and unique design considerations of metal halides High Intensity Discharge (HID) lamps and power supplies in aircraft applications.
Standard

High Intensity Discharge Light Sources
2014-04-03
HISTORICAL
ARP5647A
This SAE Aerospace Recommend Practice (ARP) is intended to identify both safety related best practices and unique design considerations of metal halides High Intensity Discharge (HID) lamps and power supplies in aircraft applications.
Standard

Measurement Procedures for Strobe Anticollision Lights
2014-01-07
HISTORICAL
ARP5029A
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
Standard

Measurement Procedures for Strobe Anticollision Lights
2007-07-09
HISTORICAL
ARP5029
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
Standard

Measurement Procedures for Short Pulse Width Strobe Anticollision Lights
2019-07-30
CURRENT
ARP5029B
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of short pulse width strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output such as the use of colored lenses, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
Standard

LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
2011-06-21
HISTORICAL
ARP6402
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter which are subject to the following CFR Parts certification: Part 23 – Airworthiness Standards: Normal, Utility, Acrobatic and Commuter Aircrafts Part 25 – Airworthiness Standards: Transport Category Aircrafts Part 27 – Airworthiness Standards: Normal Category Rotorcraft Part 29 – Airworthiness Standards: Transport Category Rotorcraft
Standard

LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
2024-03-22
CURRENT
ARP6402B
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high-performance fighter and attack f Helicopter g Electric Vertical Takeoff and Landing (EVTOL) and Urban Air Mobility (UAM)
Standard

LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
2022-09-23
HISTORICAL
ARP6402A
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter which are subject to the following CFR Parts certification: Part 23 – Airworthiness Standards: Normal, Utility, Acrobatic and Commuter Aircrafts Part 25 – Airworthiness Standards: Transport Category Aircrafts Part 27 – Airworthiness Standards: Normal Category Rotorcraft Part 29 – Airworthiness Standards: Transport Category Rotorcraft
Standard

MINIMUM PERFORMANCE STANDARD FOR ANTICOLLISION LIGHT SYSTEMS
1978-01-01
HISTORICAL
AS8017
This Aerospace Standard will define minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system.
Standard

MINIMUM PERFORMANCE STANDARD FOR ANTICOLLISION LIGHT SYSTEMS
1991-04-20
HISTORICAL
AS8017A
This Aerospace Standard will define minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system.
Standard

Minimum Performance Standard for Anticollision Light Systems
2004-01-30
HISTORICAL
AS8017B
This Aerospace Standard will define minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system.
<< First< Previous123Next >Last >>
X